4CR 2370 Multi Orange Putty 1.5 kg incl. hardener

Multi Orange:
Characteristics
Easy to sand Low- viscosity self- leveling 2-component polyester light
filler for leveling dents and unevenness in car repairs.
Multi Orange is characterized by its very smooth and pore- free surface
the use of an additional fine filler can be dispensed with.
Adhesion to iron, steel, aluminum, galvanized surfaces, GRP and
Wood. No sagging of the filler.
V.O.C. Value
EU limit value for the product category B / b 250 g / l
This product contains max. 10 g / l
Tech Tip
– Adhesion to iron, steel, aluminum, galvanized surfaces, GRP and
Wood.
– Use 4CR 2900.0051 white BPO Hardener
– Recomended mixing with 4CR Putty board 2690 (Onion board)
– Changes colour when sanded (sanding guide)
– Very easy sanding
– No Holes
– No sagging of the filler.
Once 4CR 2370 has dried and sanded, it can be over- coated
using all customary paint systems. For the sealing of eventual
pores Cover putty stains with 4CR Filler.
Application
Processing conditions from 10°C and up to 80% relative air humidity.
The polyester putty will not fully harden at under +10 C.
Substrate treatment:
iron, steel, aluminum, galvanized surfaces, GRP and Wood:
Clean, derust and sand the surface, degrease with anti-silicone.
Old coatings:
Remove by sanding all traces of old thermoplastic coats (nitrocellulose based paint, 1K-acrylic coats) as well as
acid reacting coats (Washprimer) and synthetic paints.
Primary coats to be treated:
EP primer after they have complete cured.
Insufficient or an excess addition of hardener can result in a stainy overcoat. A sealing of the surface with 4CR
Filler is recommended.
Technical Data
Mixing ratio
Pot life
Sanding (20°C) Hardener
Colour
Solids content (weight-%):
Density at 20 °C:
100 : 2
3 – 4 Min.
after approx. 20- 25 min. 2900.0051 BPO white
Orange
80.9 %
1.212 g/cm³ (DIN EN ISO 2811-1)